Switch off power at the main circuit breaker before installation.
Small Wall Switch
- Connect live input wire to L
- Connect live output to lighting points L1 L2 L3.
- Neutral is optional. Connect neutral to N.
Smart Heater Switch
- Combine both L with a connector and connect to live input.
- Combine both L1 with a connector and connect to live output.
- Neutral is compulsory. Connect neutral to N.
Connect your phone to a 2.4GHz Wi-Fi network.
- All our smart devices require a seconds smart hub, set it up here first.
- To setup our smart switches, hold down a button for at least 5 seconds.
- The light indicator will start to blink rapidly. Next, go to seconds app.
- Tab on plus icon on the top right corner of home tab.
- Select add device and switch zigbee and pair it to the nearest hub.
- Confirm the indicator is blinking and wait approx 2 min to connect.